CFD Modeling for Characterization and Optimization of In-situ Ozone Treatment Performance – Presented August 2016 at IOA PAG Conference (www.ioa-pag.org)

Optimization of Mixing and Mass Transfer in Pipeline Ozone Contactors Using Computational Fluid Dynamics – Presented September 2015 at IOA PAG Conference (www.ioa-pag.org)

Pilot-Scale Investigation of Transfer Efficiency in Sidestream Ozone Systems (Factors Creating Differences in Bromate Formation)- Presented September 2015 at IOA PAG Conference (www.ioa-pag.org)

Retrofit of Ozone Contact Basins with Sidestream Venturi Gas Injection – Presented July 2015 at IOA World Congress (www.ioa-ea3g.org)

The Multiple Benefits of Ozone in Municipal Wastewater Treatment and Recycling – Presented August 2014 at IOA PAG Conference (www.ioa-pag.org)

Quest to Cost Effectively Meet Recycled Water Standards with Preozonation and Biologically Active Filtration – Presented October 2013 at WEFTEC (www.wef.org)

Effect of Municipal Piping and Hydraulic Plant Design on Venturi Ozone Injector Performance – Presented September 2013 at IOA-IUVA World Congress (www.ioa-ea3g.org)

Bromate Formation Differences between Ozone Sidestream-with-Degas and Diffuser Transfer Systems – Presented September 2012 at IOA PAG Conference (www.ioa-pag.org)

Optimizing Ozone Transfer through Pipeline, Multi-jet Gas Mixing – Presented May 2011 at IOA IUVA World Congress (www.ioa-ea3g.org)

Mitigating Environmental Impact of Gold Mine Wastewater through Ozone Oxidation and Aquifer Re-injection – Presented September 2009 at IOA World Congress (www.ioa-ea3g.org)

Investigating Two Scales of In-Line Multi-Jets Ozone Contactors – Presented August 2008 at IOA PAG Conference (www.ioa-pag.org)

Product Recovery through Ozone Oxidation of Waste Liquor – Presented August 2008 at IOA PAG Conference (www.ioa-pag.org)

Optimization of CIP Process for Ozone Sanitization Retrofit – Presented August 2008 at IOA PAG Conference (www.ioa-pag.org)

Wastewater Surcharge Reduction by Ozone Advanced Oxidation at Methane Driven Combined Cycle Co-Generation Utility – Presented September 13, 2004 at at IOA World Congress (www.io3a.org)



Optimize with Ozone — Switch to Ozone Improves CIP Process PerformanceIndustrial Water & Wastes Digest, March/April 2017

Engineered Solution for Bromate Production During Ozonation – Jim Jackson, May 2016

Getting the Most from CFD Modeling in Mass Transfer System DesignFlow Control, February 2016

CFD Modeling Improves Venturi Ozone Injection PerformanceWorld Water, November/December 2013

Meeting Municipal Plant Design and Performance Criteria through Custom Ozone Degas Separator DesignOzone News, February 2011

Reducing the Carbon Footprint of Municipal and Industrial Ozone SystemsWater Conditioning & Purification, August 2010

Ozone Disinfection And Public Health: A Historical ProspectiveWaterOnline – The Water Solutions Update, 2008

Pass the Ozone — and Hold the E.coliWaterTechOnline.com, September 2007

Ozone from Dreaded Pollutant to Primary Disinfectant in Two Decades Water Conditioning & Purification, August 2006



Optimization of Mixing and Mass Transfer in In-line Multi-Jet Ozone Contactors Using CFDOzone: Science & Engineering, June 2016

Hydrodynamic Characterization and Mass Transfer Analysis of an In-Line Multi-Jets Ozone ContactorOzone: Science & Engineering, November 2011

PIV/PLIF Study of Impinging Jet Ozone Bubble Column with Mixing NozzlesOzone: Science & Engineering, April 2010

Utilization of Ozone for Treating Vegetable Processing LinesOzone: Science & Engineering, July 2009

Which is the Best Oxidant for Complexed Iron Removal from Groundwater: The Kogalym CaseOzone: Science & Engineering, March 2008

After a Decade of Development: A Profile of Municipal Drinking Water Plants Utilizing a Sidestream Injection ProcessOzone: Science & Engineering, August 2007

Use of Ozone for Disinfection and Taste and Odor Control at Proposed Membrane FacilityOzone: Science & Engineering, August 2007