Other Products

OTHER PRODUCTS

PURCHASE Mazzei products NOW from one of our authorized distributors:

 

For Suction Line Kits and Bypass Assembly Kits, click on button above. Additional accessory parts are available in the following categories:

flowmeters-group-small

FLOWMETERS
Excellent quality flowmeters are available in different calibration sizes to match the suction flows of the injector. These are injection molds of chemical resistant polysulfone with #316 stainless steel float material. Units are available for in-line and panel mount (90 degree elbows) installations. The F-44 and F-45 series have flowmeters available to cover operating water flow ranges between 1.5 GPH to 600 GPH (5.7 LPH to 2,271 LPH).

F-30 L FLOWMETER

The F-30 is molded of polycarbonate with a #316 stainless steel float and set point indicator and 1/4″ barb/MNPT connections. The F-30 is recommended for use with 1/2″ and 3/4″ Mazzei injector models. Units are available for in-line installations. Operating water flow range: 5 GPH – 40 GPH or 10 LPH – 150 LPH.

 

 

FLOWMETER SUCTION LINE KIT (KR-F-30L) available for F-30 Flowmeter.

STRAINERS
Tube end stainless steel mesh strainer with a polypropylene body is shown to the left. Available in 1/4″, 3/8″, or 1/2″ connections.

CHECK VALVES
These excellent quality in-line check valves with low cracking pressures are used in liquid or gas suction applications.

 

 

 

INJECTOR CHECK VALVE REPAIR KITS
Includes replacement parts for internal Mazzei Injector check valves: PTFE Suction Port Ball, Kel-F Gasket, and Hastelloy C-22 spring if needed (injector models 283 & 287 do not require a spring).

CAPS and PVDF BELL REDUCERS & POLYPROPYLENE FITTING REDUCER
Caps are available in US threads and Metric BSPT threads in various sizes. Bell reducers are also available in US threads and Metric BSPT threads in various sizes.

METERING VALVES
SHOWN: MV-25A (left) polypropylene valve with barb connections for 1/4 ” ID X 3/8 ” OD tubing to work with 1/2″ and 3/4″ injectors, and MV-50 (right) polypropylene and Teflon® valve with Viton O-ring seals and 1/2 ” female NPT connections for 1.0″ and 1.5″ injectors.*

MV5 METERING VALVES
SHOWN: MV5 PP (left) in polypropylene and MV5 N-PVDF (right) in natural PVDF — both have 1/2 ” Male NPT threaded fittings and are designed for chemical feed applications.

Group of Tubing AdaptersTUBING ADAPTERS
SHOWN: TA-225 (left) polyethylene, 1/4″ Male NPT x 1/4″ Hose Barb Connections;

TA-525 (center) polyethylene, 1/2″ Male NPT x 1/4″ Hose Barb Connections;

TA-550 (right) polyethylene, 1/2″ Male NPT x 1/2″ Hose Barb Connections;

NOT SHOWN: TA-325 polyethylene, 1/4″ Male NPT x 3/8″ Hose Barb Connections;

TA-537 polyethylene, 1/2″Male NPT x 3/8″ Hose Barb Connections;

TA-550F polypropylene, 1/2″ Female NPT x 1/2″ Hose Barb Connections;

TA-525 N-PVDF natural PVDF, 1/2″ Male NPT x 1/4″ Hose Barb Connections;

TA-537 N-PVDF natural PVDF, 1/2″ Male NPT x 3/8″ Hose Barb Connections;